Cabinet Refinishing

April 23, 2009

Refinishing cabinets is a large undertaking, and it is imperative that you follow these steps to get a grade A product.  First is preparation, the surfaces must be CLEAN and sanded. The amount of prep will be determined by the amount of filth that has accumulated on the cabinets, and the type of finish. When cleaning, I like to use a non-rinse TSP substitute and a green scrubby. After the surfaces are free of contaminates, you should sand the entire surface. I always sand enough to dull the gloss of the previous coating to ensure proper adhesion of the top coat or primer. The amount of sanding involved, will depend on how smooth you would like the surfaces, and what type of product that will be applied.  A good example: if you are going from a lacquer system to a waterborne system then, you need to really rough up the surfaces to be painted. From this point you need to decide what product that you are going to use, because this will determine if you need a primer and what type of primer it will be.  If you have decided to paint, then you must use a primer that is going to stick to lacquer, varnish, or urethane. I use white shellac, or quick dry oil base primer, or last resort a waterborne primer not waterbased. I will only use waterborne primer if fumes are an issue.  When choosing a waterborne primer it is very important to choose the right product, because if you don’t choose one with tenacious adhesion you will be sorry!  Always apply two coats of paint, preferably something that cures fast and is non-blocking. This will prevent the surfaces from sticking together and it will be easier to clean. If you are planning to use lacquer, urethane, or varnish, then you should apply the appropriate  sanding sealer before application of the top coat. In some cases this will act as  a bonding agent. It is also easier to sand the sealer than the finish. If you do it right, there will be very minimal sanding before the last coat is applied. It is always a good idea to do a little investigation on the products before you apply them, NOT ALL products are created equal.


Boxing paint?

March 22, 2009

When you are painting, it is a good idea to know about how much paint you will need to finish the job. You will want to box (marry or mix) all the same color paint. This will ensure color consistency for touch up purposes. You also don’t want to finish your painting project with a color that is slightly off. This can cost you your time and money. If you are going to be applying two coats then, make sure you have the same amount for the second coat. It is also a good idea to have extra for touch up. If you are purchasing paint that is not pre-tinted (stock) or medium to deep tones, I always recommend boxing the paint. When I am painting inside, I will always box my paint because inconsistencies in the paint color and sheen are easily detected. In my line of work we have a saying,” material is cheap, and labor is expensive!” Take the time and box your paint!


To spray or not to spray!

March 15, 2009

A frequently asked question when I’m painting interiors is,”are you going to spray?” Well it depends on what type of job it is, what the budget might be, and if you want to be able to touch it up. If you have a rental and cost is a factor, then spraying is the way to go. When I paint doors, trim, furniture, or cabinets, I almost always spray. Spraying is much faster and will produce outstanding results, but it has its downfalls. As the depth of color increases, the ability for touch up decreases. Also the touch ups will flash, meaning the sheen will appear different. It is always best to brush and roll the walls, if you know you will be living there for awhile. Spraying may help keep your budget, but remember the disadvantages.


Welcome

March 6, 2009

Welcome to our new website ~
We are very excited about the new things to come and will begin our blog soon!!
Please email us with any topics you would like to read about ~
The Motta Bellissimo family